Recent Commercial Posts

What To Know About Sewer Damage Cleanup

9/25/2019 (Permalink)

Sewage water on a toilet Water from a toilet is categorized as black water

3 Steps To Clean Safely and Efficiently Sewer Damage

If your business in Spring Hill, OK, faces a potential sewer cleanup, you may be wondering how to go about the process. Here are three steps that can help you not only clean up the mess thoroughly, but safely and efficiently as well.

1. Call a Restoration Service

If you find your business is in need of a sooner clean up its best to contact a water damage restoration service as quickly as possible. Sewage cleanup can be tricky for a number of reasons, however professional services have the tools and knowledge required to do so properly. They will be able to instruct you as to the necessary steps and safety precautions.

2. Sewage is Black Water

Because water from a flooded toilet, sewage main, and other similar sources are categorized as Black water, certain safety precautions have to be observed when conducting a sewer cleanup. Black water is any source of water that could have bacteria in it including that from fecal matter. As such proper safety gear must be worn during the process, and the area must be thoroughly sanitized afterwards.

3. The Area Should Be Sanitized

If you experience a sewer backup at your place of business it's important to have the area thoroughly sanitized after the cleanup process. This helps prevent the spread of bacteria that could cause further problems, and helps keep you and your employees safe. During the sanitation process certain cleaners may be used, and the restoration service may inspect areas other than that where obvious damage occurred. This is partially to ensure that no water damage has seeped into unseen areas such as behind walls or under flooring where it can present future problems.
Because a sewer cleanup can be a tricky process due to the black water nature of sewer contamination, and the necessity of sanitation, it's important to contact a professional restoration service if you experience problems of this nature. Not only will these professionals have the proper tools, but they should be able to answer any questions you may have as well.

3 Tips for Roof Repair After a Fire

8/29/2019 (Permalink)

The inside of a building covered up in smoke and damaged after a fire loss Fire damage in a Slaughterville, OK building

What Fire Insurance Is Best For Your Company?

When you have a business in Slaughterville, OK, then you may be wondering what fire insurance coverage is best for your company. Here's a few tips that may help.

1. Know What’s in Your Existing Policy

One of the first things to know about insurance as what is contained in your existing policy. Some policies very by whether they pay out the actual cost value, or the anticipated cost of replacement. This can make a difference in how much coverage you have in the event of fire were to occur on the property. You may also want to check whether you have specific fire coverage, or an all perils policy. If you do have a fire policy then fire restoration, repairs and smoke cleanup should also be covered.

2. Keep Your Policy Up-to-date

You will also want to ensure that your fire insurance coverage is up to date. This means if you acquire a new building structure, such as a storage shed, or equipment, that you may want to ensure that it is included in any insurance you may have, or purchase a policy specific to the item.

3. Use a Restoration Service

In many cases your insurance company may recommend a restoration service. Not only do these professionals have the ability to restore the variety of types of damages that can occur with a fire, but in many cases have resources that can help the insurance company with your claim. These may include an electronic database of damaged items, as well as the ability to check progress as it occurs.
When considering what fire insurance coverage you want for your business, it's important to know what's in your existing policy so that you can see if there are any gaps you would like additional coverage for. It's also important to keep your policy up-to-date with any new additions or equipment that may be on your property. If you do suffer damage you may want to work with a restoration service who can help both you and your agent with the information needed for your claim.

How To Know If Your Facility Has Mold

7/17/2019 (Permalink)

Mold can hide in many places.

No commercial building in Norman, OK is completely immune from developing a mold problem. Mold can occur any time there is excess dampness or condensation inside a facility. If you’re unsure whether there is mold at your commercial property, an indoor environmental specialist can perform a mold test so you can try to catch it early.

A few questions to consider.

  1. Has there been any recent water damage? Moisture is the primary source of mold, so whether it’s a leaky roof or the effects of flooding, any kind of water inside your commercial facility can lead to mold growth. 
  1. Are the air ducts cleaned regularly? HVAC and other ventilation systems are commonly known to carry mold, so it’s important to find out when they were last cleaned. 
  1. Is there a strong odor in the building? Sometimes a musty smell means there is mold present. If your employees report an unpleasant odor, it could be the presence of black mold, which is often smelled before it is seen.

Mold can hide in many places indoors, such as under carpet, inside walls and paneling, and in piping and insulation. It has also been found behind wallpaper, but it’s important to be cautious about investigating it without an indoor environmental specialist present; once exposed, mold spores can spread easily. It only takes two to three days for mold to grow indoors. If you do suspect a mold outbreak at your commercial facility, stay away from suspected areas until experts can come and perform the necessary tests. 

If a mold breaks out but goes undetected for a long time, the more damage it can cause. That could disrupt your operations and impact you financially. If your building has suffered any water damage, watch for mold signs. The sooner it’s discovered, the sooner an indoor environmental specialist can come in to clean it up. 

Proactive Plumbing Tips for Business Owners

6/20/2019 (Permalink)

Commercial office with water damage due to a burst pipe

Commercial buildings are prone to certain types of plumbing problems. Many people filter through your building in Slaughterville, OK, and you can't watch the whole structure all the time. There are some measures you can take, however, to prevent some common water issues.

Frequent Inspections

All fixtures wear out eventually, and those in public buildings see more traffic than others. Regular inspections can help you identify problems, such as:

  • Broken pipe - Look for water stains on ceilings and walls.
  • Clogged toilet - Make sure each toilet expels the contents of the bowl when flushed.
  • Blocked drain - Check sinks for slowed or stalled draining.
  • Hidden leak - Monitor your water bill for unexplained spikes.

In addition to these issues, any time you see water where it shouldn't be, it is likely you have plumbing problems of some kind.

Reliable Partners

You don't want to wait until you have a problem to find someone to fix it. Establish a relationship with a local plumber early. Then, when you need plumbing help, you know someone to call who can be there quickly. It is also a good idea to find water restoration experts who can mitigate the damage caused by the leak. Then all you have to do when you discover a problem is make a couple of calls and turn off the water main to avoid additional damage.

Timely Maintenance

Sometimes leaks happen, and there's no way to prevent all of them. The best way to avoid extensive damage from a broken pipe is to address it quickly. The sooner you call professionals who can get it fixed, the less damage you will have in the long run, and you can avoid mold growth and other secondary damage as well.

You may experience a few plumbing problems in your building. If you are vigilant about inspections and routine maintenance, however, you can minimize the damage they cause.

Why Does Mold Smell?

4/12/2019 (Permalink)

If you smell a strong musty odor you may have a mold problem

It isn't uncommon for properties to have distinctive smells. Think of the difference between stepping into a dentist's office versus a legal firm, for example. Some aromas are just a reflection of the work that goes on within the building, such as in a flower shop. Additionally, environmental factors influence the smells within a building. However, a musty odor shouldn't be dismissed as the result of a rainy day. That distinctive odor could be carrying a mycotoxin.

What Smells?

A mycotoxin is any toxic substance that is produced by a fungus, such as mold. If you've ever gone down into an unused cellar, you may have noticed a distinctive musty smell. For many property owners, that scent immediately leads to concerns. The substances produced during active mold growth include:

  • 1-octen-3-ol, or "mushroom alcohol"
  • Geosmin, often smelled after rain
  • 1-butanol
  • Borneol
  • 3-octanone
  • 2-hexanone

It's interesting to note that some of these aroma-making substances are used in the production of perfumes, such as 1-octen-3-ol. However, this fact shouldn't prevent you from hiring a mold remediation specialist if you notice the scent in a closet on your property.

Testing for Trouble

These professionals will probably run a few different tests to determine the extent and severity of the problem. They are likely to test for MVOCs, or Microbial Volatile Organic Compounds, often a primary source of that musty odor, and for high humidity levels, a source of mold growth. With the information from these tests, the specialist will create a mold remediation plan that probably involves reducing moisture levels in trouble spots, completing repairs around your property, and initiating preventative strategies, such as HEPA filtration devices.

Take Note:

It's important to remember that a given mycotoxin may produce smells without presenting any real impact on building occupants. As you work closely with mold remediation technicians in Lexington, OK, you'll learn more about why mold causes odors and how to prevent further growth.

Steps To Take in Spring for Irrigation Maintenance

12/31/2018 (Permalink)

After a long winter in Eason, OK, spring brings with it the promise of new growth. In order to achieve this growth and see landscape flourish, it is time to turn those winterized sprinklers back on. The winterization process is an important step in irrigation maintenance, but it is also very important to make sure you take the necessary steps before turning your sprinkler system back on. Making sure you do a thorough check of your system can aid in avoiding unwanted sprinkler flooding. Use the following steps as a guide.

1. Inspect Sprinkler Heads

Sprinkler heads are the most prominent part of your sprinkler system. The fact that they reside above ground means they can easily be broken. It is important to check that all sprinkler heads are in place and in good working order. A missing head can lead to a geyser of water shooting out, resulting in flooding. Simply replace any broken or missing heads.

2. Turn Your Water On Slowly

When it comes time to turn your sprinklers back on, you want to ensure you turn the water on at the valve slowly. Turning the water on too fast can cause pressure issues in your pipes that can lead to a burst. Allowing the water to flow slowly into the pipes avoids pressure buildup.

3. Check the Pipes

Checking the pipes is usually the most important part of your irrigation maintenance. With the pipes being underground, it can be difficult to check them. Once you have turned your sprinkler system back on, keep an eye on the system. If water is bubbling up around a sprinkler head, or if you see a sunken area on the ground, these are key signs that your pipes may need to be fixed. The most obvious sign is flooding and pooling. If pipes are not promptly fixed, they can require water damage repair.

Irrigation maintenance is paramount to keeping your sprinkler system in good working order. Fixing issues now can save a headache down the road.

3 Differences Between Mitigation and Restoration

10/19/2018 (Permalink)

Water mitigation in Etowah,OK

During a storm, your building may suffer some damage. When this happens, it can be good to know the difference between mitigation and restoration before hiring a flood cleanup company.

Mitigation vs. Restoration: What Are They?

Understanding what mitigation and restoration are and how the processes pertain to the cleanup and repair of your building is important. Here are some differences between the two:

  1. Mitigation comes first. If your building has been harmed during a storm, one of the first things you should do is make sure it will not sustain any further damage. During mitigation, a flood cleanup company can provide services, such as removing water and boarding up windows, to keep water from spreading and increasing the problems with your building.
  2. Mitigation is usually finished quickly. With mitigation, the company does not usually make any repairs to your building. The job here is simply to prevent any further harm. Because of this, the mitigation process is done as quickly as possible so that restoration can begin, as the restoration company can only start repairing your building after mitigation has finished.
  3. Restoration can be lengthy. Repairs are done during the restoration process, so it can often take much longer than mitigation. Depending on the extent of damage during the storm, the restoration process can take months to complete.

Mitigation vs. Restoration: Which Do You Need?

If your building has suffered damage during a storm in Etowah,OK, you may be wondering which of these services you need. The answer is that you will likely need both. Having mitigation done before you begin repairs can save a lot of work and trouble in the long run. If you begin repairs without mitigation first, you may end up needing to do more fixes than you would have otherwise.

Mitigation and restoration are services that go well together since they each offer something that the other does not. When you are searching for a flood cleanup company, it may be a good idea to find one that offers both services.

Secondary Water Damage Explained

9/27/2018 (Permalink)

Supply line in a bathroom burst causing water damage in an office in Etowah, OK

If you've had a burst pipe, toilets backing up, or other flooding problems in your Etowah, OK, business, a call to the plumber is only the beginning of clearing up the mess. Significant damage may occur due to the water and excess moisture. It's important for this to be cleaned up as soon as possible. Failure to do this can lead to secondary damage, which can include hidden structural problems and black mold. These can be extremely expensive to eliminate.

What is Secondary Damage?

In a nutshell, secondary water damage is any damage that's not caused directly by the flooding incident. This damage can manifest in a number of ways, including:

  • Vinyl and other types of flooring pulling up from the floor
  • Finish damage and buckling of wooden floors
  • Mold growth, such as trichoderma and stachybotrys chartarum (black mold)
  • Sagging and cracking sheetrock or drywall

This secondary damage occurs when the primary damage is not addressed properly, or the damage isn't found for a long while. Lingering high humidity may also be a culprit; if proper dehumidification techniques aren't used, moisture can remain to cause big problems.

How to Prevent Secondary Damage

If you are able to enter the building, you can take some immediate steps to help contain the damage. Ventilate the area as well as possible with AC in the summer, or by opening windows and turning on the heat during the winter. Remove as much water as possible by mopping and moving saturated rugs outside or to another dry area. Remove any items such as furniture, electronics, and documents as well.

The only way to be certain that you won't have to deal with secondary damage is to call a professional water damage restoration company right away. They will immediately do an inspection to assess the extent of the damage, then use specialized equipment to make sure everything is completely dried and disinfected to prevent any spread of harmful pathogens such as bacteria or black mold. They will also be able to make any necessary structural repairs and get your building back to its former condition. Armed with the information outlined above and the help of a professional restoration service, you can make sure that secondary damage is avoided.

Dealing With Water Damage From a Commercial Fire

8/14/2018 (Permalink)

It's an unpleasant fact, but if you've had fire damage your place of business, you're almost always going to have to deal with water damage as well.

If you're dealing with a fire to your Norman, OK, business, chances are you've sustained significant water damage as well. Pipes or water heaters may have burst, and most likely more than one fire hose was used to subdue the blaze. Carpets and upholstery are probably saturated, and there's a looming threat of mold if the situation isn't taken care of right away. You'll need to call a professional fire restoration company as soon as possible to see to the water and fire damage. They will do the necessary emergency cleanup right away to make sure that further problems don't occur.

The restoration company will follow these steps:

• Damage inspection
• Water removal
• Drying and dehumidification
• Cleanup and sanitization
• Damage repair

Inspecting Damage

Before any kind of fire damage cleanup can begin, the restoration company needs to know where exactly the damage is, and how severe it is. They will carefully inspect every part of the damaged structure before any water is removed.

Water Removal

To make sure that no further damage is sustained, any standing water needs to be removed as soon as possible. The restoration company will use industrial-strength pumps and vacuums to eliminate as much moisture as possible. At this point, air movers and dehumidifiers are brought in to purge any remaining moisture.

Cleanup and Sanitization

The next essential step is to make sure that no microbes or mold remain to pose a health threat. Any items that can be saved, such as furniture or office equipment, will be sanitized using a variety of specialized cleaning and disinfecting techniques.

Damage Repair

When all the moisture is removed, and all surfaces have been cleaned and sanitized, the final phase of repair and restoration will start. The actual process can vary, from carpet replacement and drywall repair to large reconstruction jobs.

It's an unpleasant fact, but if you've had fire damage your place of business, you're almost always going to have to deal with water damage as well. But with the help of a reputable restoration company, you'll be able to quickly get your business back on track. For more information, visit http://www.SERVPROnorman.com/.

How to Protect a Business from Fire and Other Disasters

5/22/2018 (Permalink)

Give SERVPRO a call after commercial fire damage.

This is a common question, but it has a disappointing answer. Try as you might, you cannot protect a business from a major disaster. This would include major fires, earthquakes, floods, tornadoes and other natural disasters. This is not to say that you cannot be prepared. Disaster preparation falls into two categories.

Keep Small Problems Small

Fire preparation is a perfect example of this. The business should have professionally installed smoke, fire detectors and alarms connected to the nearest fire station. These should be on battery backup along with emergency lighting to help with evacuation. It should have sprinkler systems in common areas where paper, plastic and other combustible materials could catch fire. It should have special fire suppression systems in computer rooms and anyplace where there are motors, generators, air conditioners or any other heavy electrical equipment. Implementing all these prevention measures will minimize fire damage and hopefully allow the business to continue operating after an incident.

Have a Recovery Plan

Every business should do disaster planning. If a business decides that it will cease to exist after a major disaster, then that’s the plan. You will find that most businesses do not have a comprehensive plan. Many have looked at setting one up with the best of intentions, but the costs are prohibitive. They finally decide on backing up the computer systems nightly, sending one copy off site weekly and figure the rest out if the disaster happens. Fortunately, the fire preparation measures above are usually enough to minimize the most common form of disaster, fire.

Recovery

The end of the disaster marks the beginning of the recovery. If the disaster was a fire, then this is when you get to see how well the fire preparation measures worked. Regardless of what type of disaster the business experienced, much of the recovery is the same. A qualified specialist from Norman, OK will need to be brought in for the cleanup and restoration. Visit http://www.SERVPROnorman.com for more information on commercial fire damage. 

What To Do When a Toilet Overflows

4/18/2018 (Permalink)

Most buildings have bathrooms available for both workers and customers. However, there is a chance that the toilets in these bathrooms can overflow and cause a lot of water damage. Toilet overflow can happen when the fixture is clogged or mechanically damaged, but it can be quickly stopped before things get drastic. Here are a few tips that can help you know how to stop a toilet from overflowing and what to do about the water that has already spilled.

How To Stop the Overflow

If the tank won’t stop releasing water into the bowl, locate the toilet’s water valve and shut the water off. The valve is usually directly behind the fixture. After that, try doing the following things:

• Clean up as much water as you can with towels or a wet vacuum.
• Remove any items that were exposed to the water.
• Open the windows to help dry out the area.

You can reduce water damage by acting immediately and efficiently.

Inspect the Damage

After cleaning up as much as you can, try to figure out what happened. It might have been a clog, or maybe a pipe is damaged. If you are inexperienced with plumbing, call the professionals in Norman, OK, to help you out. If the toilet flood was especially bad, call a water damage company to help you prevent mold and further damage.

Be Careful Around Sewage

If the toilet overflow involves sewage, use protective clothing such as gloves or watertight boots to clean up the water. Sewage is potentially harmful and should not come into direct contact with your skin. Be sure to properly disinfect the entire area once the water is removed.

With these tips in mind, you can handle this situation with control. Prevent future toilet overflow problems by cleaning your building’s bathrooms often and by doing frequent plumbing inspections. It doesn’t hurt to have a plunger nearby, too. For more information, visit http://www.SERVPROnorman.com/.

Commercial Fire Prevention Tips for Norman

3/26/2018 (Permalink)

SERVPRO Commercial Fire Tips So Your Business and Money Don't Go Up in Smoke

Suggestions from SERVPRO to Prevent Commercial Fires in Norman

Substantial fire damage in Norman  Commercial buildings and retail stores are environments where outbreaks of fires occur with too much frequency. When we talk about fire prevention and fire safety, it usually revolves around a house, keeping it intact and secure. The protection of our family is always paramount, so we practice fire drills and exit strategies just in case of a fire damaging event. But what about fire safety in a Norman commercial business setting? SERVPRO offers fire prevention tips for businesses and discusses ways to avoid fire damage at work.


Commercial Fire Damage Tips. Keep employees, co-workers, and customers safe by preventing a fire from breaking out at your place of business. Also, we will discuss some tips to help reduce fire damage and property loss in an office environment.

Preventing Workplace Fires. There are many threats to a business owner's livelihood and safety– some preventable and others not. Though every fire cannot be prevented, there are some steps you and your employees can take to reduce the risk of a fire starting in the workplace.

Electrical fires make up a sizable percentage of reported fire outbreaks each year and, regarding property damage, are among the most costly. Fortunately, electrical fires are one of the most preventable types. For starters, never overload an electrical outlet or power strip. Stay within the parameters of amperage allotted to your business establishment. If more juice is necessary, SERVPRO suggests that you hire an electrician to boost the electrical load. Outlets are made to handle specific workloads, and the more electronics you plug into them, the higher the risk of a fire-causing power overload. Heavy appliances, such as photocopiers, break room refrigerators, and large numbers of computers or servers can draw large amounts of current. Never plug more than one major appliance into an outlet, as you run the risk of overloading the circuits.

Flammable material and chemicals should always be secured in well-ventilated storage areas away from electrical outlets, power strips, and areas that experience higher-than-normal levels of heat, such as an oven or water heater. Clutter, in general, creates a large fire hazard, since it can act as fuel for fire and rapidly spread flames. A messy office can also prevent access to emergency exits at work, making it difficult for employees and customers to evacuate and difficult for emergency workers to perform rescue and fire extinguishing efforts. Always keep entry and exit points clear. The same goes for electrical panels – if an electrical fire occurs, you will want to shut off power immediately. If the electrical panel is blocked, the fire will have time to spread before you can turn off the electricity.

Be sure to schedule time with your local fire marshal to inspect fire extinguishers, smoke alarms, and fire suppressant sprinklers on a regular basis. Of course, no amount of preparation and care can guarantee 100% prevention of fire damage  in your workplace in Norman. Have SERVPRO on your speed dial for immediate response to any commercial fire damaging event.

Locally Owned Company with National Resources

SERVPRO of Norman can respond immediately to your commercial fire damage emergency regardless of the scope or size of the damage. We are part of a national network of over 1,650 Franchises with special Disaster Recovery Teams ready to help you in Norman. We are faster to any size disaster. (405) 292-0808

The Basics of Business Interruption Insurance

3/19/2018 (Permalink)

Many business owners in Norman, OK have disaster insurance, commercial building insurance and even personal property insurance, but not many consider business interruption insurance. Interruption coverage can be as crucial as a flood or disaster policy, and perhaps even more so. Whereas most insurance policies cover physical damages, they do not cover intangible losses, such as lost revenue and lost customers, that are the result of a closed business or a necessary rebuild. If you don’t have interruption coverage for your business, here are a few good reasons you should consider purchasing a policy today:

• It covers lost income that results when you are forced to leave the premises for an extended period.
• It covers the revenue you would have earned based on earning reports from previous years.
• It covers operating costs that may or may not continue post-disaster, such as electricity.

Cover Your Bases With a Sound Policy

Unfortunately, there is no telling how long you will be out of business post-disaster. If your building was subject to a flood, you may only be closed for the week that it takes the water remediation team to clean out your structure and its contents. However, if your Norman, OK building was in the path of a tornado or a hurricane, you may have to rebuild entirely, which could take months.

Even a week of lost income can be financially damaging; months of lost revenue can mean the end of your business. Bearing that in mind, you should consider investing in a policy that covers your company for more than a few days. Most business interruption policies allow the insured to cover losses for a period of restoration up to 720 days.

Don’t Let a Disaster Close Your Doors — Get the Coverage You Need

If you live in a disaster-prone area, the smartest thing you can do for your business and your livelihood is to invest in interruption coverage. The right policy can cover losses during the entire time it takes to rebuild and reopen your doors. Visit http://www.SERVPROofnorman.com for more information on commercial storm damage

Water Damage and Fire Damage Go Hand in Hand

2/8/2018 (Permalink)

When you’re recovering from a fire on your commercial properties in Lexington, Oklahoma, it's natural to wonder why you incurred both fire damage and water damage at the same time. While you might have a basic understanding of the role of water in fighting a destructive fire, it's helpful to comprehend what happens when a fire starts to burn. The mechanics of fire suppression rely on such an understanding, and this knowledge also gives you greater insight into the restoration and cleanup process.

Why Does a Fire Burn?

While most people learn principles that make fire work in high school science classes, this knowledge also forms the foundation for both basic and advanced firefighting techniques. Fires need four crucial components to start and keep burning:

• Fuel (sometimes called a “reducing agent”)
• Energy, in the form of heat
• An oxidizing agent (commonly oxygen)
• A chemical reaction

What accounts for a blaze’s destructive nature that leads to massive fire damage is its dependence on these four elements. So long as there are plentiful supplies of fuel, heat and oxygen, a fire's chemical reaction will continue, permitting it to burn, grow and spread.

How Is a Fire Extinguished?

Fire suppression focuses on robbing the flames of one or more of these elements. When delivered in huge quantities through a fire hose, water both significantly reduces a fire’s heat and takes away oxygen as it transmutes from liquid to vapor form at extremely high temperatures. Unfortunately, this enormous amount of water also floods buildings and wreaks havoc on its own.

Even with groundbreaking modern methods for quenching a blaze, the most expedient way to kill a fire is with a huge amount of water. That’s why flooding and excess water occurs with most fire damage on your commercial properties in Lexington, Oklahoma. This combination is why a restoration professional’s job includes extracting water, soot, odors and smoke from your property along with completing essential repairs.

For more on water and fire damage visit us at http://www.SERVPROofnorman.com.

4 Steps to a Sewage Cleanup

1/17/2018 (Permalink)

A sewer backup is a nightmare for business owners in Norman, OK. Any flooded toilet or backed-up sewage is black water. This is water filled with bacteria and pathogens. Since it is dangerous for your building, it is imperative that you have experts in charge of the sewer cleanup. Here are the four steps that they are likely to follow.

1. Response

Always call someone at the first sign of a sewage backup at your company. A professional should respond immediately and act as soon as possible. Experts know the risk of contaminated standing water. They want to help you get rid of it quickly. Keep in mind that it only takes about 24 hours for mold or mildew to grow after a flood.

2. Inspection

Once the company arrives, they will inspect the building to judge the scope of the damage. The restoration company can use this information to design a cleanup plan. They will look for signs of water damage, mold and trapped water.

3. Cleanup

The sewer cleanup can be broken into several steps. First, the non-salvageable items are disposed of. After, the professionals can clean and remove salvageable contents. After the contents are taken out and cleaned, they will focus on the building itself. Demolition may take place next. They may have to remove drywall, carpeting and paneling.

4. Restoration

Once the experts clean and disinfect your business, you can focus on the restoration. This is the step where you can replace old furniture, reinstall carpets and choose new paneling. The goal is for your company to be as good as new.

Sewer cleanup is a long process. It is important to stick with it throughout the process because each step is important to the well being of your building, yourself and your patrons. If you do not clean up the contaminated water correctly, it can lead to worse damage.
 Visit http://www.SERVPROofnorman.com for more information on commercial water damage.

Safe Flood Clean Up for Businesses

12/2/2017 (Permalink)

Safe Flood Clean Up for Businesses

When a building is impacted by a flood, proper clean up is critical. When it is a commercial building, clean up can be both a bigger task and a bigger safety concern. Water that is considered to be contaminated can pose dangers to employees, customers or residents of the building. That’s why it is important for every commercial property owner in Norman, OK to know more about water extraction and content cleaning.

What Is Contaminated Water?

Commonly referred to as “black water,” toxic flood water requires more than just extraction. It contaminates everything it touches, including the air, with things such as hepatitis and E. coli bacteria. Because mold and bacteria begin growing in as little as 24 hours, the situation can worsen very quickly, so it’s important to act immediately.

What Standards Do Water Cleanup Specialists Follow?

Because of the hazards of cleaning up flooded areas, water restoration experts follow specific standards to ensure full decontamination:

Removing porous materials, such as wood, drywall or carpeting
Eliminating microbes on non-porous surfaces, such as concrete or glass, and salvaging the materials
Cleaning and treating air
Preventing mold grow
Monitoring for contaminants

Why Use a Water Damage Repair Expert?

The chemicals, tools and equipment necessary for proper decontamination are tools of the trade for restoration technicians. When combined with their training and expertise, it makes them a valuable resource for anyone facing water damage. Technicians are also typically available around the clock because they know emergencies caused by floods aren’t limited to normal working hours.

Commercial property owners in Norman, OK want to keep their buildings safe, and if they know more about content cleaning and black water decontamination, they can better prepare to react when flooding occurs. Arming oneself with knowledge and relying on experts to help clean up flood waters is a smart move that can save money in the long run. Visit http://www.SERVPROofnorman.com for more information on flood damage.

SERVPRO Has High Standards When Dealing With Mold Damage To Your Hall Park Nail Salon

6/11/2017 (Permalink)

Keep Mold and Fungal Growth Out of Your Nail Salon in Hall Park, Call SERVPRO

For Mold Remediation in Businesses in Hall Park, Rely on SERVPRO

Mold damage is a potential problem for any business owner. Visible growth looks unsightly and gives your business a dirty look that does not appeal to customers and can lead to losing clients or getting a bad review on YELP, Facebook, or TripAdvisor. Mold can also have health effects, so the presence of fungus makes for a less healthy environment for your staff and customers alike.
 
Another concern about mold damage to your Hall Park nail salon is the harm it does to your premises and belongings. The fungus thrives on moisture and use materials such as drywall, carpet, or upholstery as a food source. That means that molds can eat on your nail bar chairs and rugs, and even your walls.
 
It is important to contact remediation experts to deal with fungi problems in your salon. Remediation experts such as SERVPRO have the necessary training and equipment to remediate the problem as quickly as possible and restore your business to a better state. Whether a small shop in a strip center or a large commercial building, the process is similar.
 
We recognize the importance of having standards and guidelines that we adhere to when dealing with mold. Sticking to set guidelines ensures that our process is the best it can be and provides reassurance to our customers that everything we do is to the highest standard and guided by consistent principles.
 
One of the standards which all SERVPRO teams adhere to is the EPA (Environmental Protection Agency) Mold Remediation Guidelines. EPA guidelines were initially developed especially for schools and commercial enterprises. EPA guidance states that we must follow these steps:
 
1. Clean and dry moldy materials. Our teams achieve this by first establishing containment to prevent airborne spores spreading, and then by thoroughly cleaning as many items as possible. We apply powerful detergents where necessary and use HEPA vacuuming, scrubbing, and ULV fogging to cleanse the area. We use air movers and dehumidifiers to encourage evaporation and lower humidity.
 
2. Discard items that cannot be cleaned. An article which cannot be cleaned provides further food for mold and increase the risk of it spreading, which is why SERVPRO disposes of such items safely.
 
3. Dry non-moldy items within 48 hours. Even items that have not been damaged by mold might still be wet if your nail salon has a leak, a humidity problem, or suffered a flood or water damage. Our teams use air movers and dehumidifiers to dry everything to an acceptable level.
 
Mold in your business needs to be dealt with swiftly. Call SERVPRO of Norman at (405) 292-0808 today for assistance.

About Hall Park, click here.

How SERVPRO Uses Ultrasonic Cleaning After Fire Damage to Your Noble Auto Parts Store

5/9/2017 (Permalink)

SERVPRO's ultrasonic cleaning process can be very useful after fire damage at your auto parts store. Call quickly after damage for best results.

Quick Response and Remediation can Reduce Loss After a Fire at Your Business

Fire damage is a serious concern for local business owners. A fire starts more easily than most people imagine. All it takes is a spark, or a faulty appliance to start a blaze. After a fire occurs, the main worry for most business owners is how to restore and save the contents of their business. After all, inventory is not cheap, and you do not want to have to pay to replace all of it unless necessary. That sort of bill can run a business into big trouble. That is why SERVPRO is here to help with the fire cleanup and restoration process and help leave your store “Like it never even happened.”
 
Commercial fire damage to your auto parts store might wreak havoc with the different auto parts you carry. There is also a risk of it damaging any repair or diagnostic equipment you happen to use. Seeing for-sale items coated in soot is disheartening. However, do not give up hope. Thanks to our leading ultrasonic cleaning technology, SERVPRO can clean soot damaged auto parts and in many cases can restore them as good as new.
 
Let us take a look at how ultrasonic cleaning works. Conventional cleaning methods rely on scrubbing, rubbing, or immersion in cleaning solutions to try and scrub away or dissolve the residue. For some soot damaged materials, this is effective. However, for others, soot has penetrated too deeply, and something else is needed.
 
Ultrasonic cleaning uses sound waves to remove dirt or particles from materials. It is suitable for many kinds of materials, including auto parts, and is tough enough to clean even heavy duty items or badly discolored parts. The secret is a process called “cavitation.” First, we immerse store items that need cleaning in liquid. The ultrasonic cleaner uses sound waves to cause the formation and bursting of microscopic bubbles in the liquid – this is cavitation. As the bubbles burst over the surface of every wrench, spanner, radiator or wiper blade, the cleaning action penetrates deep to remove soot.
 
We fully train our IICRC-certified technicians to choose the best cleaning solution and products to use in the ultrasonic cleaning process for optimum results.
 
If you are concerned about cleaning up soot in your auto parts store, give SERVPRO of Norman a call today at (405) 292-0808.

Commercial Flood Damage and Your Hall Park Marriage Counseling Practice

3/22/2017 (Permalink)

Don't let flooding keep you out of your office. Call SERVPRO to remediate.

SERVPRO Returns Your Property to Normal After Flooding

Best practices and legal requirements that focus on the medical fields have also changed how counseling is carried out. Now, counseling clients are provided the same protections that medical patients are given. With increased paperwork, privacy protections, and other enhancements to your practice, a flood can put much of this at risk of loss, and that can put your practice at risk of sanctions. SERVPRO can help you avoid additional problems in addition to the ones that flooding normally causes.

Hall Park offices have flooding for various reasons, and this flooding often results in commercial flood damage that can affect buildings for months afterward. If cleanup efforts are not commenced immediately, damage can continue for much longer, and it can even spread beyond the area that was initially damaged by the water.

In counseling practices, notes are often taken during each session, assisting in a continuity of care that can follow a client if he or she decide to begin services with another counselor, as well as providing a history that can help diagnose problems and form avenues of treatment. During a flood, the increased humidity can damage these notes and other documents. SERVPRO has document drying services that can save these, helping ensure that privacy and other legal requirements can be met.

Flooding can make your office inaccessible for an extended period. It is during this time that intruders might decide to enter to see what can be stolen. Because of this too-often occurrence, we also provide temporary fencing. This can often be enough of a deterrent that no break-ins happen. Fencing off your building from those who would enter the property can also protect you from subsequent injury lawsuits.

Document drying and temporary fencing are only part of the methods we use to restore an office that is damaged by flooding. Flooring must be completely dried and cleaned, followed by sanitizing. Walls may need to be replaced with new drywall and painted. Furniture is also often dramatically affected by flooding, and we can restore yours to like-new condition. We understand that your practice is a reflection of you as a professional, as we aim to give you the best possible results.

Calling SERVPRO of Norman at (405) 292-0808 should be your first step in regaining your practice's functionality and protecting your patients' rights to confidentiality and privacy. We are always here, no matter when you may need us.

SERVPRO Works in a Warehouse's Favor in Lexington

2/28/2017 (Permalink)

Water damage at a warehouse with food storage needs to be handled with lightning speed. Call SERVPRO immediately after damage has occurred.

Quick Response Can Greatly Benefit the Outcome After Water Damage Has Occured

When a warehouse or agricultural business has been flooded or taken significant water damage, safety, speed, and thoroughness in restorations are all factors that cannot be compromised. SERVPRO carries the technology, tools, and personnel to handle these complex and often large-scale disasters quickly and cost-effectively, without ever sacrificing on quality and transparency. If your warehouse has taken on substantial water damage, rest assured that we are up to the task of handling the damages.
 
Fast and Heavy Water Removal
 
Many Lexington commercial warehouse water damage cases occur in food and agricultural buildings, making water removal a big and demanding job when it is required. SERVPRO stocks the sort of heavy-duty equipment needed to pump out water in high volumes, and to dry the area completely once standing water has been removed. In buildings with large floor spaces or underground levels, we often bring in multiple truck-mounted pumps to get water out within hours. Once that is complete, our fleet of air movers and dehumidifiers moves in to finish the drying process.
 
Safety Precautions and Preventative Measures
 
Many warehouses contain perishable or hazardous materials, requiring specialized care to handle and dry. We have a broad range of certifications to our name, enabling us to tackle even the most unique and potentially dangerous floods and water damages. We also work closely with you and insurance companies to make sure that any particular safety requirements for the building are fulfilled to their fullest extent during restorations.
 
Fast Response Times and Intensive Service
 
A common problem that plagues damaged buildings is a lack of commitment from the restoration company. Some companies will delay their response times either out of incompetence or to directly increase damages and costs for you. We employ a strategy of fast responses and mitigation to drive down costs and get your warehouse back in operation in as little time as possible.
 
SERVPRO of Norman is an experienced local franchise of a national company that can help your business to overcome any natural disaster. Call us around the clock at (405) 292-0808.