Toilet Clogs and How To Fix Them
Your home can suffer water damage in many ways, but sewer problems are probably the last things you want to deal with. These issues can cause widespread damage and pose a threat to your health and safety. Luckily, professional flood remediation crews are equipped to do sewage cleaning. For smaller, yet nagging, problems with your plumbing system, there are some things you can do to repair them.
Sources of Toilet Clogs
Have you ever seen or heard your toilet overflow while you showered? This phenomenon may confuse you, but the reason is simple. Somewhere between the toilet and the sewer, there's a clog. As your shower runs, the waste lines are blocked, so they exit at the first possible place: the toilet. Here are some possible reasons for the blockage:
- Excessive toilet paper
- Hair and other feminine hygiene products
- Other debris that was accidentally flushed down
Use a Plunger
For smaller clogs, a simple plunger might clear out a clogged pipe. This is often effective when the blockage is higher up in the line closer to the toilet. Make sure you get a good seal with the plunger. Then, thrust downward a few times. If the water in the toilet goes down, and it flushes properly, you fixed the problem.
Use a Snake
If the plunger fails, try a plumber's snake. This device can reach far down into the line. Using flexible wire, it is designed to remove tough clogs. Many of these are motorized, though you can find hand-held ones too.
Call the Professionals
The sewer line could also be to blame for the blockage. If this is the case, a professional crew in Norman, OK, can take care of sewage cleaning and get your system running properly.
Sewage cleaning isn't for a novice. If you discover this to be the culprit for your toilet overflowing, make sure you get an experienced technician on the case.